Facts And Formulae: 1.Highest Common Factor:(H.C.F) or Greatest Common Meaure(G.C.M) : The H.C.F of two or more than two numbers is the greatest number that divides each of them exactly. There are two methods : 1.Factorization method: Express each one of the given numbers as the product of prime factors. The product of least powers of common prime factors gives HCF. Example : Find HCF of 26 * 32*5*74 , 22 *35*52 * 76 , 2*52 *72 Sol: The prime numbers given common numbers are 2,5,7 Therefore HCF is 22 * 5 *72 . 2.Division Method : Divide the larger number by smaller one. Now divide the divisor by remainder. Repeat the process of dividing preceding number last obtained till zero is obtained as number. The last divisor is HCF. Example: Find HCF of 513, 1134, 1215 Sol:1134) 1215(1 1134 ---------- 81)1134(14 81 ----------- 324 324 ----------- 0 ----------- HCF of this two numbers is 81. 81)513(6 486 -------- 27)81(3 81 ----- 0 ---HCF of 81 and 513 is 27. 3.Least common multiple[LCM] : The least number which is divisible by each one of given numbers is LCM. There are two methods for this: 1.Factorization method : Resolve each one into product of prime factors. Then LCM is product of highest powers of all factors. 2.Common division method. Problems: 1.The HCF of 2 numbers is 11 and LCM is 693.If one of numbers is 77.find other. Sol: Other number = 11 * 693/77=99. 2.Find largest number of 4 digits divisible by 12,15,18,27 Sol: The largest number is 9999. LCM of 12,15,18,27 is 540. on dividing 9999 by 540 we get 279 as remainder. Therefore number =9999 – 279 =9720. 3.Find least number which when divided by 20,25,35,40 leaves remainders 14,19,29,34. Sol:20–14=6 25-19=6 35-29=6 40-34=6Therefore number =LCM of (20,25,35,40) - 6=1394 4.252 can be expressed as prime as :2 252 2 126 3 63 3 21 7 prime factor is 2 *2 * 3 * 3 *75.1095/1168 when expressed in simple form is1095)1168(1 1095 ------ 73)1095(15 73 --------- 365 365 --------- 0 ---------- So, HCF is 73Therefore 1095/1168 = 1095/73/1168/73= 15/16 6.GCD of 1.08,0.36,0.9 is Sol: HCF of 108,36,9036)90(2 72 ---- 18)36(2 36 ---- 0 ---- HCF is 18. HCF of 18 and 108 is 18 18)108(6 108 ------- 0 -------- Therefore HCF =0.187.Three numbers are in ratio 1:2:3 and HCF is 12.Find numbers. Sol: Let the numbers be x. Three numbers are x,2x,3x Therefore HCF is2x)3x(1 2x ----- x)2x(2 2x -------- 0 ------------- HCF is x so, x is 12Therefore numbers are 12,24,36. 8.The sum of two numbers is 216 and HCF is 27. Sol: Let numbers are27a + 27 b =216 a + b =216/27=8Co-primes of 8 are (1,7) and (3,5)numbers=(27 * 1 ), (27 * 7) =27,899.LCM of two numbers is 48..The numbers are in ratio 2:3. The sum of numbers is Sol: Let the number be x. Numbers are 2x,3x LCM of 2x,3x is 6x Therefore 6x=48 x=8. Numbers are 16 and 24 Sum=16 +24=40. 10.HCF and LCM of two numbers are 84 and 21.If ratio of two numbers is 1:4.Then largest of two numbers is Sol: Let the numbers be x,4x Then x * 4x = 84 * 21 x2 =84 * 21 /4 x = 21 Largest number is 4 * 21. 11.HCF of two numbers is 23,and other factors of LCM are 13,14.Largest number is Sol: 23 * 14 is Largest number. 12.The maximum number of students among them 1001 pens and 910 pencils can be distributed in such a way that each student gets same number of pens and pencils is ? Sol: HCF of 1001 and 910910)1001(1 910 ------------ 91)910(10 910 -------- 0 --------- Therefore HCF=9113.The least number which should be added to 2497 so that sum is divisible by 5,6,4,3 ? Sol: LCM of 5,6,4,3 is 60. On dividing 2497 by 60 we get 37 as remainder. Therefore number to added is 60 – 37 =23. Answer is 23. 14.The least number which is a perfect square and is divisible by each of numbers 16,20,24 is ? Sol: LCM of 16,20,24 is 240. 2 * 2*2*2*3*5=240 To make it a perfect square multiply by 3 * 5 Therefore 240 * 3 * 5=3600 Answer is 3600.
Saturday, March 5, 2011
Aptitude Test
Thursday, February 10, 2011
Interview Question on SQLSERVER
1. What is normalization? - Well a relational database is basically composed of tables that contain related data. So the Process of organizing this data into tables is actually referred to as normalization.
2. What is a Stored Procedure? - Its nothing but a set of T-SQL statements combined to perform a single task of several tasks. Its basically like a Macro so when you invoke the Stored procedure, you actually run a set of statements.
3. Can you give an example of Stored Procedure? - sp_helpdb , sp_who2, sp_renamedb are a set of system defined stored procedures. We can also have user defined stored procedures which can be called in similar way.
4. What is a trigger? - Triggers are basically used to implement business rules. Triggers is also similar to stored procedures. The difference is that it can be activated when data is added or edited or deleted from a table in a database.
5. What is a view? - If we have several tables in a db and we want to view only specific columns from specific tables we can go for views. It would also suffice the needs of security some times allowing specfic users to see only specific columns based on the permission that we can configure on the view. Views also reduce the effort that is required for writing queries to access specific columns every time.
6. What is an Index? - When queries are run against a db, an index on that db basically helps in the way the data is sorted to process the query for faster and data retrievals are much faster when we have an index.
7. What are the types of indexes available with SQL Server? - There are basically two types of indexes that we use with the SQL Server. Clustered and the Non-Clustered.
8. What is the basic difference between clustered and a non-clustered index? - The difference is that, Clustered index is unique for any given table and we can have only one clustered index on a table. The leaf level of a clustered index is the actual data and the data is resorted in case of clustered index. Whereas in case of non-clustered index the leaf level is actually a pointer to the data in rows so we can have as many non-clustered indexes as we can on the db.
9. What are cursors? - Well cursors help us to do an operation on a set of data that we retreive by commands such as Select columns from table. For example : If we have duplicate records in a table we can remove it by declaring a cursor which would check the records during retreival one by one and remove rows which have duplicate values.
10. When do we use the UPDATE_STATISTICS command? - This command is basically used when we do a large processing of data. If we do a large amount of deletions any modification or Bulk Copy into the tables, we need to basically update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.
11. Which TCP/IP port does SQL Server run on? - SQL Server runs on port 1433 but we can also change it for better security.
12. From where can you change the default port? - From the Network Utility TCP/IP properties –> Port number.both on client and the server.
13. Can you tell me the difference between DELETE & TRUNCATE commands? - Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.
14. Can we use Truncate command on a table which is referenced by FOREIGN KEY? - No. We cannot use Truncate command on a table with Foreign Key because of referential integrity.
15. What is the use of DBCC commands? - DBCC stands for database consistency checker. We use these commands to check the consistency of the databases, i.e., maintenance, validation task and status checks.
16. Can you give me some DBCC command options?(Database consistency check) - DBCC CHECKDB - Ensures that tables in the db and the indexes are correctly linked.and DBCC CHECKALLOC - To check that all pages in a db are correctly allocated. DBCC SQLPERF - It gives report on current usage of transaction log in percentage. DBCC CHECKFILEGROUP - Checks all tables file group for any damage.
17. What command do we use to rename a db? - sp_renamedb ‘oldname’ , ‘newname’
18. Well sometimes sp_reanmedb may not work you know because if some one is using the db it will not accept this command so what do you think you can do in such cases? - In such cases we can first bring to db to single user using sp_dboptions and then we can rename that db and then we can rerun the sp_dboptions command to remove the single user mode.
19. What is the difference between a HAVING CLAUSE and a WHERE CLAUSE? - Having Clause is basically used only with the GROUP BY function in a query. WHERE Clause is applied to each row before they are part of the GROUP BY function in a query.
20. What do you mean by COLLATION? - Collation is basically the sort order. There are three types of sort order Dictionary case sensitive, Dictonary - case insensitive and Binary.
21. What is a Join in SQL Server? - Join actually puts data from two or more tables into a single result set.
22. Can you explain the types of Joins that we can have with Sql Server? - There are three types of joins: Inner Join, Outer Join, Cross Join
23. When do you use SQL Profiler? - SQL Profiler utility allows us to basically track connections to the SQL Server and also determine activities such as which SQL Scripts are running, failed jobs etc..
24. What is a Linked Server? - Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements.
25. Can you link only other SQL Servers or any database servers such as Oracle? - We can link any server provided we have the OLE-DB provider from Microsoft to allow a link. For Oracle we have a OLE-DB provider for oracle that microsoft provides to add it as a linked server to the sql server group.
26. Which stored procedure will you be running to add a linked server? - sp_addlinkedserver, sp_addlinkedsrvlogin
27. What are the OS services that the SQL Server installation adds? - MS SQL SERVER SERVICE, SQL AGENT SERVICE, DTC (Distribution transac co-ordinator)
28. Can you explain the role of each service? - SQL SERVER - is for running the databases SQL AGENT - is for automation such as Jobs, DB Maintanance, Backups DTC - Is for linking and connecting to other SQL Servers
29. How do you troubleshoot SQL Server if its running very slow? - First check the processor and memory usage to see that processor is not above 80% utilization and memory not above 40-45% utilization then check the disk utilization using Performance Monitor, Secondly, use SQL Profiler to check for the users and current SQL activities and jobs running which might be a problem. Third would be to run UPDATE_STATISTICS command to update the indexes
30. Lets say due to N/W or Security issues client is not able to connect to server or vice versa. How do you troubleshoot? - First I will look to ensure that port settings are proper on server and client Network utility for connections. ODBC is properly configured at client end for connection ——Makepipe & readpipe are utilities to check for connection. Makepipe is run on Server and readpipe on client to check for any connection issues.
31. What are the authentication modes in SQL Server? - Windows mode and mixed mode (SQL & Windows).
32. Where do you think the users names and passwords will be stored in sql server? - They get stored in master db in the sysxlogins table.
33. What is log shipping? Can we do logshipping with SQL Server 7.0 - Logshipping is a new feature of SQL Server 2000. We should have two SQL Server - Enterprise Editions. From Enterprise Manager we can configure the logshipping. In logshipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db and we can use this as the DR (disaster recovery) plan.
34. Let us say the SQL Server crashed and you are rebuilding the databases including the master database what procedure to you follow? - For restoring the master db we have to stop the SQL Server first and then from command line we can type SQLSERVER –m which will basically bring it into the maintenance mode after which we can restore the master db.
35. Let us say master db itself has no backup. Now you have to rebuild the db so what kind of action do you take? - (I am not sure- but I think we have a command to do it).
36. What is BCP? When do we use it? - BulkCopy is a tool used to copy huge amount of data from tables and views. But it won’t copy the structures of the same.
37. What should we do to copy the tables, schema and views from one SQL Server to another? - We have to write some DTS packages for it.
38. What are the different types of joins and what dies each do?
39. What are the four main query statements?
40. What is a sub-query? When would you use one?
41. What is a NOLOCK?
42. What are three SQL keywords used to change or set someone’s permissions?
43. What is the difference between HAVING clause and the WHERE clause?
44. What is referential integrity? What are the advantages of it?
45. What is database normalization?
46. Which command using Query Analyzer will give you the version of SQL server and operating system?
47. Using query analyzer, name 3 ways you can get an accurate count of the number of records in a table?
48. What is the purpose of using COLLATE in a query?
49. What is a trigger?
50. What is one of the first things you would do to increase performance of a query? For example, a boss tells you that “a query that ran yesterday took 30 seconds, but today it takes 6 minutes”
51. What is an execution plan? When would you use it? How would you view the execution plan?
52. What is the STUFF function and how does it differ from the REPLACE function?
53. What does it mean to have quoted_identifier on? What are the implications of having it off?
54. What are the different types of replication? How are they used?
55. What is the difference between a local and a global variable?
56. What is the difference between a Local temporary table and a Global temporary table? How is each one used?
57. What are cursors? Name four types of cursors and when each one would be applied?
58. What is the purpose of UPDATE STATISTICS?
59. How do you use DBCC statements to monitor various aspects of a SQL server installation?
60. How do you load large data to the SQL server database?
61. How do you check the performance of a query and how do you optimize it?
62. How do SQL server 2000 and XML linked? Can XML be used to access data?
63. What is SQL server agent?
64. What is referential integrity and how is it achieved?
65. What is indexing?
66. What is normalization and what are the different forms of normalizations?
67. Difference between server.transfer and server.execute method?
68. What id de-normalization and when do you do it?
69. What is better - 2nd Normal form or 3rd normal form? Why?
70. Can we rewrite subqueries into simple select statements or with joins? Example?
71. What is a function? Give some example?
72. What is a stored procedure?
73. Difference between Function and Procedure-in general?
74. Difference between Function and Stored Procedure?
75. Can a stored procedure call another stored procedure. If yes what level and can it be controlled?
76. Can a stored procedure call itself(recursive). If yes what level and can it be controlled.?
77. How do you find the number of rows in a table?
78. Difference between Cluster and Non-cluster index?
79. What is a table called, if it does not have neither Cluster nor Non-cluster Index?
80. Explain DBMS, RDBMS?
81. Explain basic SQL queries with SELECT from where Order By, Group By-Having?
82. Explain the basic concepts of SQL server architecture?
83. Explain couple pf features of SQL server
84. Scalability, Availability, Integration with internet, etc.)?
85. Explain fundamentals of Data ware housing & OLAP?
86. Explain the new features of SQL server 2000?
87. How do we upgrade from SQL Server 6.5 to 7.0 and 7.0 to 2000?
88. What is data integrity? Explain constraints?
89. Explain some DBCC commands?
90. Explain sp_configure commands, set commands?
91. Explain what are db_options used for?
92. What is the basic functions for master, msdb, tempdb databases?
93. What is a job?
94. What are tasks?
95. What are primary keys and foreign keys?
96. How would you Update the rows which are divisible by 10, given a set of numbers in column?
97. If a stored procedure is taking a table data type, how it looks?
98. How m-m relationships are implemented?
99. How do you know which index a table is using?
100. How will oyu test the stored procedure taking two parameters namely first name and last name returning full name?
101. How do you find the error, how can you know the number of rows effected by last SQL statement?
102. How can you get @@error and @@rowcount at the same time?
103. What are sub-queries? Give example? In which case sub-queries are not feasible?
104. What are the type of joins? When do we use Outer and Self joins?
105. Which virtual table does a trigger use?
106. How do you measure the performance of a stored procedure?
107. Questions regarding Raiseerror?
108. Questions on identity?
109. If there is failure during updation of certain rows, what will be the state?
What is De-normalization?
De-normalization is the process of attempting to optimize the performance of a database by adding redundant data. It is sometimes necessary because current DBMSs implement the relational model poorly. A true relational DBMS would allow for a fully normalized database at the logical level, while providing physical storage of data that is tuned for high performance. De-normalization is a technique to move from higher to lower normal forms of database modeling in order to speed up database access.
De-normalization is the process of attempting to optimize the performance of a database by adding redundant data. It is sometimes necessary because current DBMSs implement the relational model poorly. A true relational DBMS would allow for a fully normalized database at the logical level, while providing physical storage of data that is tuned for high performance. De-normalization is a technique to move from higher to lower normal forms of database modeling in order to speed up database access.
How to get @@error and @@rowcount at the same time?If @@Rowcount is checked after Error checking statement then it will have 0 as the value of @@Recordcount as it would have been reset.
And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable. SELECT @RC = @@ROWCOUNT, @ER = @@ERROR
And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable. SELECT @RC = @@ROWCOUNT, @ER = @@ERROR
What is Identity?
Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers, the value of this cannot be controled. Identity/GUID columns do not need to be indexed.
Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers, the value of this cannot be controled. Identity/GUID columns do not need to be indexed.
What is a Scheduled Jobs or What is a Scheduled Tasks?
Scheduled tasks let user automate processes that run on regular or predictable cycles. User can schedule administrative tasks, such as cube processing, to run during times of slow business activity. User can also determine the order in which tasks run by creating job steps within a SQL Server Agent job. E.g. Back up database, Update Stats of Tables. Job steps give user control over flow of execution. If one job fails, user can configure SQL Server Agent to continue to run the remaining tasks or to stop execution.
Scheduled tasks let user automate processes that run on regular or predictable cycles. User can schedule administrative tasks, such as cube processing, to run during times of slow business activity. User can also determine the order in which tasks run by creating job steps within a SQL Server Agent job. E.g. Back up database, Update Stats of Tables. Job steps give user control over flow of execution. If one job fails, user can configure SQL Server Agent to continue to run the remaining tasks or to stop execution.
What is a table called, if it does not have neither Cluster nor Non-cluster Index? What is it used for?Unindexed table or Heap. Microsoft Press Books and Book On Line (BOL) refers it as Heap.
A heap is a table that does not have a clustered index and, therefore, the pages are not linked by pointers. The IAM pages are the only structures that link the pages in a table together.
Unindexed tables are good for fast storing of data. Many times it is better to drop all indexes from table and than do bulk of inserts and to restore those indexes after that.
A heap is a table that does not have a clustered index and, therefore, the pages are not linked by pointers. The IAM pages are the only structures that link the pages in a table together.
Unindexed tables are good for fast storing of data. Many times it is better to drop all indexes from table and than do bulk of inserts and to restore those indexes after that.
What is BCP? When does it used?
BulkCopy is a tool used to copy huge amount of data from tables and views. BCP does not copy the structures same as source to destination.
BulkCopy is a tool used to copy huge amount of data from tables and views. BCP does not copy the structures same as source to destination.
How do you load large data to the SQL server database?BulkCopy is a tool used to copy huge amount of data from tables. BULK INSERT command helps to Imports a data file into a database table or view in a user-specified format.
Can we rewrite subqueries into simple select statements or with joins?
Subqueries can often be re-written to use a standard outer join, resulting in faster performance. As we may know, an outer join uses the plus sign (+) operator to tell the database to return all non-matching rows with NULL values. Hence we combine the outer join with a NULL test in the WHERE clause to reproduce the result set without using a sub-query.
Subqueries can often be re-written to use a standard outer join, resulting in faster performance. As we may know, an outer join uses the plus sign (+) operator to tell the database to return all non-matching rows with NULL values. Hence we combine the outer join with a NULL test in the WHERE clause to reproduce the result set without using a sub-query.
Can SQL Servers linked to other servers like Oracle?
SQL Server can be lined to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has a OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group.
SQL Server can be lined to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has a OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group.
How to know which index a table is using?
SELECT table_name,index_name FROM user_constraints
SELECT table_name,index_name FROM user_constraints
How to copy the tables, schema and views from one SQL server to another?
Microsoft SQL Server 2000 Data Transformation Services (DTS) is a set of graphical tools and programmable objects that lets user extract, transform, and consolidate data from disparate sources into single or multiple destinations.
Microsoft SQL Server 2000 Data Transformation Services (DTS) is a set of graphical tools and programmable objects that lets user extract, transform, and consolidate data from disparate sources into single or multiple destinations.
What is Self Join?
This is a particular case when one table joins to itself, with one or two aliases to avoid confusion. A self join can be of any type, as long as the joined tables are the same. A self join is rather unique in that it involves a relationship with only one table. The common example is when company have a hierarchal reporting structure whereby one member of staff reports to another.
This is a particular case when one table joins to itself, with one or two aliases to avoid confusion. A self join can be of any type, as long as the joined tables are the same. A self join is rather unique in that it involves a relationship with only one table. The common example is when company have a hierarchal reporting structure whereby one member of staff reports to another.
What is Cross Join?
A cross join that does not have a WHERE clause produces the Cartesian product of the tables involved in the join. The size of a Cartesian product result set is the number of rows in the first table multiplied by the number of rows in the second table. The common example is when company wants to combine each product with a pricing table to analyze each product at each price.
A cross join that does not have a WHERE clause produces the Cartesian product of the tables involved in the join. The size of a Cartesian product result set is the number of rows in the first table multiplied by the number of rows in the second table. The common example is when company wants to combine each product with a pricing table to analyze each product at each price.
Which virtual table does a trigger use?
Inserted and Deleted.
Inserted and Deleted.
List few advantages of Stored Procedure.
- Stored procedure can reduced network traffic and latency, boosting application performance.
- Stored procedure execution plans can be reused, staying cached in SQL Server’s memory, reducing server overhead.
- Stored procedures help promote code reuse.
- Stored procedures can encapsulate logic. You can change stored procedure code without affecting clients.
- Stored procedures provide better security to your data.
What is DataWarehousing?
- Subject-oriented, meaning that the data in the database is organized so that all the data elements relating to the same real-world event or object are linked together;
- Time-variant, meaning that the changes to the data in the database are tracked and recorded so that reports can be produced showing changes over time;
- Non-volatile, meaning that data in the database is never over-written or deleted, once committed, the data is static, read-only, but retained for future reporting;
- Integrated, meaning that the database contains data from most or all of an organization’s operational applications, and that this data is made consistent.
What is OLTP(OnLine Transaction Processing)?
In OLTP – online transaction processing systems relational database design use the discipline of data modeling and generally follow the Codd rules of data normalization in order to ensure absolute data integrity. Using these rules complex information is broken down into its most simple structures (a table) where all of the individual atomic level elements relate to each other and satisfy the normalization rules.
In OLTP – online transaction processing systems relational database design use the discipline of data modeling and generally follow the Codd rules of data normalization in order to ensure absolute data integrity. Using these rules complex information is broken down into its most simple structures (a table) where all of the individual atomic level elements relate to each other and satisfy the normalization rules.
How do SQL server 2000 and XML linked? Can XML be used to access data?
FOR XML (ROW, AUTO, EXPLICIT)
You can execute SQL queries against existing relational databases to return results as XML rather than standard rowsets. These queries can be executed directly or from within stored procedures. To retrieve XML results, use the FOR XML clause of the SELECT statement and specify an XML mode of RAW, AUTO, or EXPLICIT.
FOR XML (ROW, AUTO, EXPLICIT)
You can execute SQL queries against existing relational databases to return results as XML rather than standard rowsets. These queries can be executed directly or from within stored procedures. To retrieve XML results, use the FOR XML clause of the SELECT statement and specify an XML mode of RAW, AUTO, or EXPLICIT.
OPENXML
OPENXML is a Transact-SQL keyword that provides a relational/rowset view over an in-memory XML document. OPENXML is a rowset provider similar to a table or a view. OPENXML provides a way to access XML data within the Transact-SQL context by transferring data from an XML document into the relational tables. Thus, OPENXML allows you to manage an XML document and its interaction with the relational environment.
OPENXML is a Transact-SQL keyword that provides a relational/rowset view over an in-memory XML document. OPENXML is a rowset provider similar to a table or a view. OPENXML provides a way to access XML data within the Transact-SQL context by transferring data from an XML document into the relational tables. Thus, OPENXML allows you to manage an XML document and its interaction with the relational environment.
What is an execution plan? When would you use it? How would you view the execution plan?
An execution plan is basically a road map that graphically or textually shows the data retrieval methods chosen by the SQL Server query optimizer for a stored procedure or ad-hoc query and is a very useful tool for a developer to understand the performance characteristics of a query or stored procedure since the plan is the one that SQL Server will place in its cache and use to execute the stored procedure or query. From within Query Analyzer is an option called “Show Execution Plan” (located on the Query drop-down menu). If this option is turned on it will display query execution plan in separate window when query is ran again.
An execution plan is basically a road map that graphically or textually shows the data retrieval methods chosen by the SQL Server query optimizer for a stored procedure or ad-hoc query and is a very useful tool for a developer to understand the performance characteristics of a query or stored procedure since the plan is the one that SQL Server will place in its cache and use to execute the stored procedure or query. From within Query Analyzer is an option called “Show Execution Plan” (located on the Query drop-down menu). If this option is turned on it will display query execution plan in separate window when query is ran again.
What is SQL Profiler?
SQL Profiler is a graphical tool that allows system administrators to monitor events in an instance of Microsoft SQL Server. You can capture and save data about each event to a file or SQL Server table to analyze later. For example, you can monitor a production environment to see which stored procedures are hampering performance by executing too slowly.
SQL Profiler is a graphical tool that allows system administrators to monitor events in an instance of Microsoft SQL Server. You can capture and save data about each event to a file or SQL Server table to analyze later. For example, you can monitor a production environment to see which stored procedures are hampering performance by executing too slowly.
Use SQL Profiler to monitor only the events in which you are interested. If traces are becoming too large, you can filter them based on the information you want, so that only a subset of the event data is collected. Monitoring too many events adds overhead to the server and the monitoring process and can cause the trace file or trace table to grow very large, especially when the monitoring process takes place over a long period of time.
What is User Defined Functions?
User-Defined Functions allow to define its own T-SQL functions that can accept 0 or more parameters and return a single scalar data value or a table data type.
User-Defined Functions allow to define its own T-SQL functions that can accept 0 or more parameters and return a single scalar data value or a table data type.
What kind of User-Defined Functions can be created?
There are three types of User-Defined functions in SQL Server 2000 and they are Scalar, Inline Table-Valued and Multi-statement Table-valued.
There are three types of User-Defined functions in SQL Server 2000 and they are Scalar, Inline Table-Valued and Multi-statement Table-valued.
Scalar User-Defined Function
A Scalar user-defined function returns one of the scalar data types. Text, ntext, image and timestamp data types are not supported. These are the type of user-defined functions that most developers are used to in other programming languages. You pass in 0 to many parameters and you get a return value.
A Scalar user-defined function returns one of the scalar data types. Text, ntext, image and timestamp data types are not supported. These are the type of user-defined functions that most developers are used to in other programming languages. You pass in 0 to many parameters and you get a return value.
Inline Table-Value User-Defined Function
An Inline Table-Value user-defined function returns a table data type and is an exceptional alternative to a view as the user-defined function can pass parameters into a T-SQL select command and in essence provide us with a parameterized, non-updateable view of the underlying tables.
An Inline Table-Value user-defined function returns a table data type and is an exceptional alternative to a view as the user-defined function can pass parameters into a T-SQL select command and in essence provide us with a parameterized, non-updateable view of the underlying tables.
Multi-statement Table-Value User-Defined Function
A Multi-Statement Table-Value user-defined function returns a table and is also an exceptional alternative to a view as the function can support multiple T-SQL statements to build the final result where the view is limited to a single SELECT statement. Also, the ability to pass parameters into a T-SQL select command or a group of them gives us the capability to in essence create a parameterized, non-updateable view of the data in the underlying tables. Within the create function command you must define the table structure that is being returned. After creating this type of user-defined function, It can be used in the FROM clause of a T-SQL command unlike the behavior found when using a stored procedure which can also return record sets.
A Multi-Statement Table-Value user-defined function returns a table and is also an exceptional alternative to a view as the function can support multiple T-SQL statements to build the final result where the view is limited to a single SELECT statement. Also, the ability to pass parameters into a T-SQL select command or a group of them gives us the capability to in essence create a parameterized, non-updateable view of the data in the underlying tables. Within the create function command you must define the table structure that is being returned. After creating this type of user-defined function, It can be used in the FROM clause of a T-SQL command unlike the behavior found when using a stored procedure which can also return record sets.
Which TCP/IP port does SQL Server run on? How can it be changed?
SQL Server runs on port 1433. It can be changed from the Network Utility TCP/IP properties –> Port number.both on client and the server.
SQL Server runs on port 1433. It can be changed from the Network Utility TCP/IP properties –> Port number.both on client and the server.
What are the authentication modes in SQL Server? How can it be changed?
Windows mode and mixed mode (SQL & Windows).
Windows mode and mixed mode (SQL & Windows).
To change authentication mode in SQL Server click Start, Programs, Microsoft SQL Server and click SQL Enterprise Manager to run SQL Enterprise Manager from the Microsoft SQL Server program group. Select the server then from the Tools menu select SQL Server Configuration Properties, and choose the Security page.
Where are SQL server users names and passwords are stored in sql server?
They get stored in master db in the sysxlogins table.
They get stored in master db in the sysxlogins table.
Which command using Query Analyzer will give you the version of SQL server and operating system?
What is SQL server agent?SQL Server agent plays an important role in the day-to-day tasks of a database administrator (DBA). It is often overlooked as one of the main tools for SQL Server management. Its purpose is to ease the implementation of tasks for the DBA, with its full-function scheduling engine, which allows you to schedule your own jobs and scripts.
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), What is SQL server agent?SQL Server agent plays an important role in the day-to-day tasks of a database administrator (DBA). It is often overlooked as one of the main tools for SQL Server management. Its purpose is to ease the implementation of tasks for the DBA, with its full-function scheduling engine, which allows you to schedule your own jobs and scripts.
Can a stored procedure call itself or recursive stored procedure? How many level SP nesting possible?
Yes. Because Transact-SQL supports recursion, you can write stored procedures that call themselves. Recursion can be defined as a method of problem solving wherein the solution is arrived at by repetitively applying it to subsets of the problem. A common application of recursive logic is to perform numeric computations that lend themselves to repetitive evaluation by the same processing steps. Stored procedures are nested when one stored procedure calls another or executes managed code by referencing a CLR routine, type, or aggregate. You can nest stored procedures and managed code references up to 32 levels.
Yes. Because Transact-SQL supports recursion, you can write stored procedures that call themselves. Recursion can be defined as a method of problem solving wherein the solution is arrived at by repetitively applying it to subsets of the problem. A common application of recursive logic is to perform numeric computations that lend themselves to repetitive evaluation by the same processing steps. Stored procedures are nested when one stored procedure calls another or executes managed code by referencing a CLR routine, type, or aggregate. You can nest stored procedures and managed code references up to 32 levels.
What is @@ERROR?
The @@ERROR automatic variable returns the error code of the last Transact-SQL statement. If there was no error, @@ERROR returns zero. Because @@ERROR is reset after each Transact-SQL statement, it must be saved to a variable if it is needed to process it further after checking it.
The @@ERROR automatic variable returns the error code of the last Transact-SQL statement. If there was no error, @@ERROR returns zero. Because @@ERROR is reset after each Transact-SQL statement, it must be saved to a variable if it is needed to process it further after checking it.
What is Raiseerror?
Stored procedures report errors to client applications via the RAISERROR command. RAISERROR doesn’t change the flow of a procedure; it merely displays an error message, sets the @@ERROR automatic variable, and optionally writes the message to the SQL Server error log and the NT application event log.
Stored procedures report errors to client applications via the RAISERROR command. RAISERROR doesn’t change the flow of a procedure; it merely displays an error message, sets the @@ERROR automatic variable, and optionally writes the message to the SQL Server error log and the NT application event log.
What is log shipping?
Log shipping is the process of automating the backup of database and transaction log files on a production SQL server, and then restoring them onto a standby server. Enterprise Editions only supports log shipping. In log shipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db can be used this as the Disaster Recovery plan. The key feature of log shipping is that is will automatically backup transaction logs throughout the day and automatically restore them on the standby server at defined interval.
Log shipping is the process of automating the backup of database and transaction log files on a production SQL server, and then restoring them onto a standby server. Enterprise Editions only supports log shipping. In log shipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db can be used this as the Disaster Recovery plan. The key feature of log shipping is that is will automatically backup transaction logs throughout the day and automatically restore them on the standby server at defined interval.
What is the difference between a local and a global variable?
A local temporary table exists only for the duration of a connection or, if defined inside a compound statement, for the duration of the compound statement.
A local temporary table exists only for the duration of a connection or, if defined inside a compound statement, for the duration of the compound statement.
A global temporary table remains in the database permanently, but the rows exist only within a given connection. When connection are closed, the data in the global temporary table disappears. However, the table definition remains with the database for access when database is opened next time.
SQL Server Interview Questions and Answers – Part 6
April 20, 2007 by pinaldave
UPDATE : Interview Questions and Answers are now updated with SQL Server 2008 Questions and its answers. New Location : SQL Server 2008 Interview Questions and Answers.
What are the properties of the Relational tables?
Relational tables have six properties:
Relational tables have six properties:
- Values are atomic.
- Column values are of the same kind.
- Each row is unique.
- The sequence of columns is insignificant.
- The sequence of rows is insignificant.
- Each column must have a unique name.
What is De-normalization?
De-normalization is the process of attempting to optimize the performance of a database by adding redundant data. It is sometimes necessary because current DBMSs implement the relational model poorly. A true relational DBMS would allow for a fully normalized database at the logical level, while providing physical storage of data that is tuned for high performance. De-normalization is a technique to move from higher to lower normal forms of database modeling in order to speed up database access.
De-normalization is the process of attempting to optimize the performance of a database by adding redundant data. It is sometimes necessary because current DBMSs implement the relational model poorly. A true relational DBMS would allow for a fully normalized database at the logical level, while providing physical storage of data that is tuned for high performance. De-normalization is a technique to move from higher to lower normal forms of database modeling in order to speed up database access.
How to get @@error and @@rowcount at the same time?If @@Rowcount is checked after Error checking statement then it will have 0 as the value of @@Recordcount as it would have been reset.
And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable. SELECT @RC = @@ROWCOUNT, @ER = @@ERROR
And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable. SELECT @RC = @@ROWCOUNT, @ER = @@ERROR
What is Identity?
Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers, the value of this cannot be controled. Identity/GUID columns do not need to be indexed.
Identity (or AutoNumber) is a column that automatically generates numeric values. A start and increment value can be set, but most DBA leave these at 1. A GUID column also generates numbers, the value of this cannot be controled. Identity/GUID columns do not need to be indexed.
What is a Scheduled Jobs or What is a Scheduled Tasks?
Scheduled tasks let user automate processes that run on regular or predictable cycles. User can schedule administrative tasks, such as cube processing, to run during times of slow business activity. User can also determine the order in which tasks run by creating job steps within a SQL Server Agent job. E.g. Back up database, Update Stats of Tables. Job steps give user control over flow of execution. If one job fails, user can configure SQL Server Agent to continue to run the remaining tasks or to stop execution.
Scheduled tasks let user automate processes that run on regular or predictable cycles. User can schedule administrative tasks, such as cube processing, to run during times of slow business activity. User can also determine the order in which tasks run by creating job steps within a SQL Server Agent job. E.g. Back up database, Update Stats of Tables. Job steps give user control over flow of execution. If one job fails, user can configure SQL Server Agent to continue to run the remaining tasks or to stop execution.
What is a table called, if it does not have neither Cluster nor Non-cluster Index? What is it used for?Unindexed table or Heap. Microsoft Press Books and Book On Line (BOL) refers it as Heap.
A heap is a table that does not have a clustered index and, therefore, the pages are not linked by pointers. The IAM pages are the only structures that link the pages in a table together.
Unindexed tables are good for fast storing of data. Many times it is better to drop all indexes from table and than do bulk of inserts and to restore those indexes after that.
A heap is a table that does not have a clustered index and, therefore, the pages are not linked by pointers. The IAM pages are the only structures that link the pages in a table together.
Unindexed tables are good for fast storing of data. Many times it is better to drop all indexes from table and than do bulk of inserts and to restore those indexes after that.
What is BCP? When does it used?
BulkCopy is a tool used to copy huge amount of data from tables and views. BCP does not copy the structures same as source to destination.
BulkCopy is a tool used to copy huge amount of data from tables and views. BCP does not copy the structures same as source to destination.
How do you load large data to the SQL server database?BulkCopy is a tool used to copy huge amount of data from tables. BULK INSERT command helps to Imports a data file into a database table or view in a user-specified format.
Can we rewrite subqueries into simple select statements or with joins?
Subqueries can often be re-written to use a standard outer join, resulting in faster performance. As we may know, an outer join uses the plus sign (+) operator to tell the database to return all non-matching rows with NULL values. Hence we combine the outer join with a NULL test in the WHERE clause to reproduce the result set without using a sub-query.
Subqueries can often be re-written to use a standard outer join, resulting in faster performance. As we may know, an outer join uses the plus sign (+) operator to tell the database to return all non-matching rows with NULL values. Hence we combine the outer join with a NULL test in the WHERE clause to reproduce the result set without using a sub-query.
Can SQL Servers linked to other servers like Oracle?
SQL Server can be lined to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has a OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group.
SQL Server can be lined to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has a OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group.
How to know which index a table is using?
SELECT table_name,index_name FROM user_constraints
SELECT table_name,index_name FROM user_constraints
How to copy the tables, schema and views from one SQL server to another?
Microsoft SQL Server 2000 Data Transformation Services (DTS) is a set of graphical tools and programmable objects that lets user extract, transform, and consolidate data from disparate sources into single or multiple destinations.
Microsoft SQL Server 2000 Data Transformation Services (DTS) is a set of graphical tools and programmable objects that lets user extract, transform, and consolidate data from disparate sources into single or multiple destinations.
What is Self Join?
This is a particular case when one table joins to itself, with one or two aliases to avoid confusion. A self join can be of any type, as long as the joined tables are the same. A self join is rather unique in that it involves a relationship with only one table. The common example is when company have a hierarchal reporting structure whereby one member of staff reports to another.
This is a particular case when one table joins to itself, with one or two aliases to avoid confusion. A self join can be of any type, as long as the joined tables are the same. A self join is rather unique in that it involves a relationship with only one table. The common example is when company have a hierarchal reporting structure whereby one member of staff reports to another.
What is Cross Join?
A cross join that does not have a WHERE clause produces the Cartesian product of the tables involved in the join. The size of a Cartesian product result set is the number of rows in the first table multiplied by the number of rows in the second table. The common example is when company wants to combine each product with a pricing table to analyze each product at each price.
A cross join that does not have a WHERE clause produces the Cartesian product of the tables involved in the join. The size of a Cartesian product result set is the number of rows in the first table multiplied by the number of rows in the second table. The common example is when company wants to combine each product with a pricing table to analyze each product at each price.
Which virtual table does a trigger use?
Inserted and Deleted.
Inserted and Deleted.
List few advantages of Stored Procedure.
- Stored procedure can reduced network traffic and latency, boosting application performance.
- Stored procedure execution plans can be reused, staying cached in SQL Server’s memory, reducing server overhead.
- Stored procedures help promote code reuse.
- Stored procedures can encapsulate logic. You can change stored procedure code without affecting clients.
- Stored procedures provide better security to your data.
What is DataWarehousing?
- Subject-oriented, meaning that the data in the database is organized so that all the data elements relating to the same real-world event or object are linked together;
- Time-variant, meaning that the changes to the data in the database are tracked and recorded so that reports can be produced showing changes over time;
- Non-volatile, meaning that data in the database is never over-written or deleted, once committed, the data is static, read-only, but retained for future reporting;
- Integrated, meaning that the database contains data from most or all of an organization’s operational applications, and that this data is made consistent.
What is OLTP(OnLine Transaction Processing)?
In OLTP – online transaction processing systems relational database design use the discipline of data modeling and generally follow the Codd rules of data normalization in order to ensure absolute data integrity. Using these rules complex information is broken down into its most simple structures (a table) where all of the individual atomic level elements relate to each other and satisfy the normalization rules.
In OLTP – online transaction processing systems relational database design use the discipline of data modeling and generally follow the Codd rules of data normalization in order to ensure absolute data integrity. Using these rules complex information is broken down into its most simple structures (a table) where all of the individual atomic level elements relate to each other and satisfy the normalization rules.
How do SQL server 2000 and XML linked? Can XML be used to access data?
FOR XML (ROW, AUTO, EXPLICIT)
You can execute SQL queries against existing relational databases to return results as XML rather than standard rowsets. These queries can be executed directly or from within stored procedures. To retrieve XML results, use the FOR XML clause of the SELECT statement and specify an XML mode of RAW, AUTO, or EXPLICIT.
FOR XML (ROW, AUTO, EXPLICIT)
You can execute SQL queries against existing relational databases to return results as XML rather than standard rowsets. These queries can be executed directly or from within stored procedures. To retrieve XML results, use the FOR XML clause of the SELECT statement and specify an XML mode of RAW, AUTO, or EXPLICIT.
OPENXML
OPENXML is a Transact-SQL keyword that provides a relational/rowset view over an in-memory XML document. OPENXML is a rowset provider similar to a table or a view. OPENXML provides a way to access XML data within the Transact-SQL context by transferring data from an XML document into the relational tables. Thus, OPENXML allows you to manage an XML document and its interaction with the relational environment.
OPENXML is a Transact-SQL keyword that provides a relational/rowset view over an in-memory XML document. OPENXML is a rowset provider similar to a table or a view. OPENXML provides a way to access XML data within the Transact-SQL context by transferring data from an XML document into the relational tables. Thus, OPENXML allows you to manage an XML document and its interaction with the relational environment.
What is an execution plan? When would you use it? How would you view the execution plan?
An execution plan is basically a road map that graphically or textually shows the data retrieval methods chosen by the SQL Server query optimizer for a stored procedure or ad-hoc query and is a very useful tool for a developer to understand the performance characteristics of a query or stored procedure since the plan is the one that SQL Server will place in its cache and use to execute the stored procedure or query. From within Query Analyzer is an option called “Show Execution Plan” (located on the Query drop-down menu). If this option is turned on it will display query execution plan in separate window when query is ran again.
An execution plan is basically a road map that graphically or textually shows the data retrieval methods chosen by the SQL Server query optimizer for a stored procedure or ad-hoc query and is a very useful tool for a developer to understand the performance characteristics of a query or stored procedure since the plan is the one that SQL Server will place in its cache and use to execute the stored procedure or query. From within Query Analyzer is an option called “Show Execution Plan” (located on the Query drop-down menu). If this option is turned on it will display query execution plan in separate window when query is ran again.
SQL Server Interview Questions and Answers – Part 2
April 16, 2007 by pinaldave
UPDATE : Interview Questions and Answers are now updated with SQL Server 2008 Questions and its answers. New Location : SQL Server 2008 Interview Questions and Answers.
What is the difference between clustered and a non-clustered index?
A clustered index is a special type of index that reorders the way records in the table are physically stored. Therefore table can have only one clustered index. The leaf nodes of a clustered index contain the data pages.
A clustered index is a special type of index that reorders the way records in the table are physically stored. Therefore table can have only one clustered index. The leaf nodes of a clustered index contain the data pages.
A nonclustered index is a special type of index in which the logical order of the index does not match the physical stored order of the rows on disk. The leaf node of a nonclustered index does not consist of the data pages. Instead, the leaf nodes contain index rows.
What are the different index configurations a table can have?
A table can have one of the following index configurations:
A table can have one of the following index configurations:
No indexes
A clustered index
A clustered index and many nonclustered indexes
A nonclustered index
Many nonclustered indexes
A clustered index
A clustered index and many nonclustered indexes
A nonclustered index
Many nonclustered indexes
What is cursors?
Cursor is a database object used by applications to manipulate data in a set on a row-by-row basis, instead of the typical SQL commands that operate on all the rows in the set at one time.
Cursor is a database object used by applications to manipulate data in a set on a row-by-row basis, instead of the typical SQL commands that operate on all the rows in the set at one time.
In order to work with a cursor we need to perform some steps in the following order:
Declare cursor
Open cursor
Fetch row from the cursor
Process fetched row
Close cursor
Deallocate cursor
Open cursor
Fetch row from the cursor
Process fetched row
Close cursor
Deallocate cursor
What is the use of DBCC commands?
DBCC stands for database consistency checker. We use these commands to check the consistency of the databases, i.e., maintenance, validation task and status checks.
E.g. DBCC CHECKDB – Ensures that tables in the db and the indexes are correctly linked.
DBCC CHECKALLOC – To check that all pages in a db are correctly allocated.
DBCC CHECKFILEGROUP – Checks all tables file group for any damage.
DBCC stands for database consistency checker. We use these commands to check the consistency of the databases, i.e., maintenance, validation task and status checks.
E.g. DBCC CHECKDB – Ensures that tables in the db and the indexes are correctly linked.
DBCC CHECKALLOC – To check that all pages in a db are correctly allocated.
DBCC CHECKFILEGROUP – Checks all tables file group for any damage.
What is a Linked Server?
Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements. With a linked server, you can create very clean, easy to follow, SQL statements that allow remote data to be retrieved, joined and combined with local data.
Storped Procedure sp_addlinkedserver, sp_addlinkedsrvlogin will be used add new Linked Server.
Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements. With a linked server, you can create very clean, easy to follow, SQL statements that allow remote data to be retrieved, joined and combined with local data.
Storped Procedure sp_addlinkedserver, sp_addlinkedsrvlogin will be used add new Linked Server.
What is Collation?Collation refers to a set of rules that determine how data is sorted and compared. Character data is sorted using rules that define the correct character sequence, with options for specifying case-sensitivity, accent marks, kana character types and character width.
What are different type of Collation Sensitivity?
Case sensitivity
A and a, B and b, etc.
Case sensitivity
A and a, B and b, etc.
Accent sensitivity
a and á, o and ó, etc.
a and á, o and ó, etc.
Kana Sensitivity
When Japanese kana characters Hiragana and Katakana are treated differently, it is called Kana sensitive.
When Japanese kana characters Hiragana and Katakana are treated differently, it is called Kana sensitive.
Width sensitivity
When a single-byte character (half-width) and the same character when represented as a double-byte character (full-width) are treated differently then it is width sensitive.
When a single-byte character (half-width) and the same character when represented as a double-byte character (full-width) are treated differently then it is width sensitive.
What’s the difference between a primary key and a unique key?
Both primary key and unique enforce uniqueness of the column on which they are defined. But by default primary key creates a clustered index on the column, where are unique creates a nonclustered index by default. Another major difference is that, primary key doesn’t allow NULLs, but unique key allows one NULL only.
Both primary key and unique enforce uniqueness of the column on which they are defined. But by default primary key creates a clustered index on the column, where are unique creates a nonclustered index by default. Another major difference is that, primary key doesn’t allow NULLs, but unique key allows one NULL only.
How to implement one-to-one, one-to-many and many-to-many relationships while designing tables?
One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships.
One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships.
Many-to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table.
One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships.
One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships.
Many-to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table.
What is a NOLOCK?
Using the NOLOCK query optimiser hint is generally considered good practice in order to improve concurrency on a busy system. When the NOLOCK hint is included in a SELECT statement, no locks are taken when data is read. The result is a Dirty Read, which means that another process could be updating the data at the exact time you are reading it. There are no guarantees that your query will retrieve the most recent data. The advantage to performance is that your reading of data will not block updates from taking place, and updates will not block your reading of data. SELECT statements take Shared (Read) locks. This means that multiple SELECT statements are allowed simultaneous access, but other processes are blocked from modifying the data. The updates will queue until all the reads have completed, and reads requested after the update will wait for the updates to complete. The result to your system is delay(blocking).
Using the NOLOCK query optimiser hint is generally considered good practice in order to improve concurrency on a busy system. When the NOLOCK hint is included in a SELECT statement, no locks are taken when data is read. The result is a Dirty Read, which means that another process could be updating the data at the exact time you are reading it. There are no guarantees that your query will retrieve the most recent data. The advantage to performance is that your reading of data will not block updates from taking place, and updates will not block your reading of data. SELECT statements take Shared (Read) locks. This means that multiple SELECT statements are allowed simultaneous access, but other processes are blocked from modifying the data. The updates will queue until all the reads have completed, and reads requested after the update will wait for the updates to complete. The result to your system is delay(blocking).
What is difference between DELETE & TRUNCATE commands?
Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.
Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.
TRUNCATE
TRUNCATE is faster and uses fewer system and transaction log resources than DELETE.
TRUNCATE removes the data by deallocating the data pages used to store the table’s data, and only the page deallocations are recorded in the transaction log.
TRUNCATE removes all rows from a table, but the table structure and its columns, constraints, indexes and so on remain. The counter used by an identity for new rows is reset to the seed for the column.
You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint.
Because TRUNCATE TABLE is not logged, it cannot activate a trigger.
TRUNCATE can not be Rolled back using logs.
TRUNCATE is DDL Command.
TRUNCATE Resets identity of the table.
TRUNCATE is faster and uses fewer system and transaction log resources than DELETE.
TRUNCATE removes the data by deallocating the data pages used to store the table’s data, and only the page deallocations are recorded in the transaction log.
TRUNCATE removes all rows from a table, but the table structure and its columns, constraints, indexes and so on remain. The counter used by an identity for new rows is reset to the seed for the column.
You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint.
Because TRUNCATE TABLE is not logged, it cannot activate a trigger.
TRUNCATE can not be Rolled back using logs.
TRUNCATE is DDL Command.
TRUNCATE Resets identity of the table.
DELETE
DELETE removes rows one at a time and records an entry in the transaction log for each deleted row.
If you want to retain the identity counter, use DELETE instead. If you want to remove table definition and its data, use the DROP TABLE statement.
DELETE Can be used with or without a WHERE clause
DELETE Activates Triggers.
DELETE Can be Rolled back using logs.
DELETE is DML Command.
DELETE does not reset identity of the table.
DELETE removes rows one at a time and records an entry in the transaction log for each deleted row.
If you want to retain the identity counter, use DELETE instead. If you want to remove table definition and its data, use the DROP TABLE statement.
DELETE Can be used with or without a WHERE clause
DELETE Activates Triggers.
DELETE Can be Rolled back using logs.
DELETE is DML Command.
DELETE does not reset identity of the table.
Difference between Function and Stored Procedure?
UDF can be used in the SQL statements anywhere in the WHERE/HAVING/SELECT section where as Stored procedures cannot be.
UDFs that return tables can be treated as another rowset. This can be used in JOINs with other tables.
Inline UDF’s can be though of as views that take parameters and can be used in JOINs and other Rowset operations.
UDF can be used in the SQL statements anywhere in the WHERE/HAVING/SELECT section where as Stored procedures cannot be.
UDFs that return tables can be treated as another rowset. This can be used in JOINs with other tables.
Inline UDF’s can be though of as views that take parameters and can be used in JOINs and other Rowset operations.
When is the use of UPDATE_STATISTICS command?
This command is basically used when a large processing of data has occurred. If a large amount of deletions any modification or Bulk Copy into the tables has occurred, it has to update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.
This command is basically used when a large processing of data has occurred. If a large amount of deletions any modification or Bulk Copy into the tables has occurred, it has to update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.
What types of Joins are possible with Sql Server?
Joins are used in queries to explain how different tables are related. Joins also let you select data from a table depending upon data from another table.
Types of joins: INNER JOINs, OUTER JOINs, CROSS JOINs. OUTER JOINs are further classified as LEFT OUTER JOINS, RIGHT OUTER JOINS and FULL OUTER JOINS.
Joins are used in queries to explain how different tables are related. Joins also let you select data from a table depending upon data from another table.
Types of joins: INNER JOINs, OUTER JOINs, CROSS JOINs. OUTER JOINs are further classified as LEFT OUTER JOINS, RIGHT OUTER JOINS and FULL OUTER JOINS.
What is the difference between a HAVING CLAUSE and a WHERE CLAUSE?
Specifies a search condition for a group or an aggregate. HAVING can be used only with the SELECT statement. HAVING is typically used in a GROUP BY clause. When GROUP BY is not used, HAVING behaves like a WHERE clause. Having Clause is basically used only with the GROUP BY function in a query. WHERE Clause is applied to each row before they are part of the GROUP BY function in a query. HAVING criteria is applied after the the grouping of rows has occurred.
Specifies a search condition for a group or an aggregate. HAVING can be used only with the SELECT statement. HAVING is typically used in a GROUP BY clause. When GROUP BY is not used, HAVING behaves like a WHERE clause. Having Clause is basically used only with the GROUP BY function in a query. WHERE Clause is applied to each row before they are part of the GROUP BY function in a query. HAVING criteria is applied after the the grouping of rows has occurred.
What is sub-query? Explain properties of sub-query.
Sub-queries are often referred to as sub-selects, as they allow a SELECT statement to be executed arbitrarily within the body of another SQL statement. A sub-query is executed by enclosing it in a set of parentheses. Sub-queries are generally used to return a single row as an atomic value, though they may be used to compare values against multiple rows with the IN keyword.
Sub-queries are often referred to as sub-selects, as they allow a SELECT statement to be executed arbitrarily within the body of another SQL statement. A sub-query is executed by enclosing it in a set of parentheses. Sub-queries are generally used to return a single row as an atomic value, though they may be used to compare values against multiple rows with the IN keyword.
A subquery is a SELECT statement that is nested within another T-SQL statement. A subquery SELECT statement if executed independently of the T-SQL statement, in which it is nested, will return a result set. Meaning a subquery SELECT statement can standalone and is not depended on the statement in which it is nested. A subquery SELECT statement can return any number of values, and can be found in, the column list of a SELECT statement, a FROM, GROUP BY, HAVING, and/or ORDER BY clauses of a T-SQL statement. A Subquery can also be used as a parameter to a function call. Basically a subquery can be used anywhere an expression can be used.
Properties of Sub-Query
A subquery must be enclosed in the parenthesis.
A subquery must be put in the right hand of the comparison operator, and
A subquery cannot contain a ORDER-BY clause.
A query can contain more than one sub-queries.
A subquery must be enclosed in the parenthesis.
A subquery must be put in the right hand of the comparison operator, and
A subquery cannot contain a ORDER-BY clause.
A query can contain more than one sub-queries.
What are types of sub-queries?
Single-row subquery, where the subquery returns only one row.
Multiple-row subquery, where the subquery returns multiple rows,.and
Multiple column subquery, where the subquery returns multiple columns
Single-row subquery, where the subquery returns only one row.
Multiple-row subquery, where the subquery returns multiple rows,.and
Multiple column subquery, where the subquery returns multiple columns
Subscribe to:
Comments (Atom)